Maytag MDE 9901 User Manual
Page 14
14
CLEANING THE LINT FILTER
1. Grasp the filter handle and pull towards you.
2. Pull the filter up out of the holder.
3. Open the filter and brush away
the lint with your hand.
4. Fold the filter together and
put it back in the filter hol-
der.
The filter may
require cleaning if
lime scale deposits
are present; see
Chapter 10, Care
and Cleaning.
EMPTYING THE CONDENSATION WATER CONTAI-
NER
Empty the condensation water container after
each tumble drying.
Pull out the condensation water container,
empty the water and put the container back.
If the container becomes too full, the pro-
gramme will be interrupted and an error messa-
ge will be displayed in the text field. Empty the
container and press the
button and the
programme will continue from where it was in-
terrupted, see also Chapter 12, Trouble shoo-
ting, heading Fault indications.
NOTE
Do not pull out the condensation water con-
tainer while the machine is running.
HINT
The condensation water is soft, and is therefore
suitable for use in a steam iron. Strain the water
through a coffee paper filter before use.
If you want the water to be emptied automa-
tically, see the Installation instructions.
AFTER TUMBLE DRYING
Turn off the main switch
.
AUTOMATIC DRAINING
See the Installation Instructions if you require
the water to be drained automatically.
TEMPORARY PROGRAMME
If you wish to run a programme without alte-
ring the pre-set programmes
P1
-
P4
, you can
create a temporary programme; see Chapter 10
- Making your own drying programmes.
1
2
77