Motorola HS810 - Manual (Page 9)

Using Your Headset
16
Note: If the link is abnormally disconnected (e.g., out of range) the headset
tries to reestablish the link.
Device Status Action
Function Phone Headset Hands Free Profile Headset Profile
Put Active
Call On Hold On–in call On Long press E N/A
Receive a
Call On–phone
rings On Short press E (call
is answered)
Press E (call is
answered)
Reject a Call On–phone
rings On Long press
E
N/A
Answer 2nd
incoming call On–in call,
2nd call
coming in On Long press
E,
places 1st call on
hold, answers
incoming call
N/A
Toggle
between two
active calls On–in call,
2nd call on
hold On Long press
E
N/A
Transfer call
from phone to
Headset On–in call On Short press E, (call
transferred to
headset)
Press E (call
transferred to
headset)
17
Using Your Headset
Using Your Headset Indicators
Headset Indicator (LED)
With charger plugged in:
With no charger attached:
Note: When the wireless headset is paired to the phone and there is no
activity for 5 minutes, the blue flashing LED turns off. Any button press on the
headset will reawaken the headset and the flashing resumes. If you press the
up and down volume buttons simultaneously during a call, the pulsing LED
turns off for the duration of that call.
Headset Indicator Headset
ON charging in progress
OFF charging complete
Headset Indicator Headset
OFF power off
ON (steady) pairing mode
10 rapid flashes pairing successful
flashes at a 3-second interval
(.1 seconds ON 2.9 seconds OFF) standby (not on a call)
pulses at an 8-second interval
(2.0 seconds ON, 6.0 seconds OFF) connected (on a call)