Using your headset, Controlling headset volume, Using your headset placing and receiving calls – Motorola HS810 User Manual
Page 8: Increasing and decreasing volume, Volume orientation technology
Using Your Headset
14
The headset will only automatically initiate a paired connection (via opening
the boom) with the last device it was connected to. If you want to connect
the headset to another device in the paired device list, you must initiate the
connection from that device. Whichever of the eight devices initiates a
connection to the headset afterwards, that device then becomes the “last
connected” device.
Controlling Headset Volume
Increasing and Decreasing Volume
To increase speaker volume, press the top volume button repeatedly until you
reach the desired volume level.
To decrease speaker volume, press the bottom volume button repeatedly until
you reach the desired volume level.
Volume Orientation Technology
To change the volume button orientation for left or right ear:
Repeat the above steps anytime to change the volume button orientation.
Step
1
With the headset’s boom closed, press and hold the Multifunction
E
button until the headset indicator turns on (about 3 seconds).
2
Press the volume button that you want to use as the volume up. The
headset indicator will flash several times to indicate success.
15
Using Your Headset
Placing and Receiving Calls
Your headset supports both Hands Free and Headset Profiles. Accessing call
functions depends on which profile your phone supports.
Note: Some phones do not support all features listed. Please consult you
phone user’s guide.
You can activate call functions for both Hands Free and Headset Profiles
according to the following table:
Device Status
Action
Function
Phone
Headset
Hands Free Profile
Headset Profile
Enter Pairing
(Configuration)
Mode
On
Off
(boom
closed)
Press & hold
E until LED remains lit.
Release
E, open boom.
Make a Voice
Dial Call
On in idle
On
Short press
E,
speak name, phone
dials call
Press
E, speak
name, phone dials call
Dial a Number On–user
dials number
On
N/A
Press
E, call is sent
Redial a
Number
On–Voice
dialing turned
on or off
On–
(Idle)
Long press
E
Press
E, (recalls last
phone number)
Press
E, (call is sent)
End a Call
On–in call
On
Short press
E
Press
E