Motorola PR860 - Manual (Page 20)

Scan
18
English
SCAN
DELETING A NUISANCE CHANNEL
If a channel continually generates unwanted calls
or noise (a “nuisance” channel), use the Scan
button to temporarily delete the channel from the
scan list:
Restoring a Channel Back
to the Scan List
To restore a previously deleted channel back
to the scan list, restart the scan operation or
turn your radio off and on again.
SCAN CHANNEL DISCOVERY ALERT
This feature enables you to identify the last
channel monitored before scanning was
stopped. To identify the last channel moni-
tored, turn the Channel Selector knob until
you hear an alert tone.
1 While the radio is on the nuisance channel, hold
down the Scan button until you hear a tone.
2 Release the Scan button. The nuisance chan-
nel is deleted.
Note:You cannot delete a priority channel or the
last remaining channel in a scan list.