Motorola PR860 - Manual (Page 16)

Getting Started
14
English
GETTING S
T
ARTED
ADJUSTING THE VOLUME
SELECTING A RADIO CHANNEL
Your radio offers either 4 or 16 channels.
Note: Due to government regulations, some
channels may not be programmed. Ask
your dealer for more information.
To select a channel, turn the Channel
Selector knob clockwise or counterclockwise
until you reach the desired channel.
SENDING A CALL
RECEIVING A CALL
1 Hold down the Volume Set or Monitor but-
ton (see page 6); you will hear a continuous
tone.
2 Turn the On/Off/Volume Control knob to the
desired volume level.
3 Release the Volume Set or Monitor button.
1 Turn your radio on.
2 Use the Channel Selector knob to select the
desired channel.
3 Hold the radio in a vertical
position, press the PTT button,
and talk at a distance of about
1 to 2 inches (2.5 to 5 cm)
from the microphone.
4 Release the PTT button to listen.
1 Turn your radio on.
2 Adjust the radio’s volume (see page 14).
3 Switch to the desired channel.
4 If at any time a call comes through, you will
hear the call at the volume level you have set.