Miele KFN 9753 iD EN - Manual (Page 26)

To reduce the risk of electrical
shock, disconnect the appliance
from the power supply by shutting
off the power main, tripping the
circuit breaker or unplugging the
power cord before maintenance.
For the care and cleaning of
stainless steel surfaces use the
Miele stainless steel conditioner
(available from Miele Customer Ser-
vice).
It contains substances that protect
the material and, compared to a
stainless steel cleaner, no polishing
agents. This gently removes soiling
and each application forms a
protective film that is stain- and
water-repellent.
Make sure that no water gets into
the electronics or into the lighting.
Do not let any cleaning water get
into the condensate drain opening.
Do not use a steam cleaner to clean
the appliance. Steam could reach
the electrical components and
cause a short circuit.
Never remove the data plate inside
the appliance.
It contains important information that is
required in the event of a service call.
To avoid damage to the surfaces do
not use any
– cleaning agents containing soda,
ammonia, acid or chloride,
– limescale removers,
– abrasive cleaning agents e.g.
powder or cream cleansers, pumice
stone,
– cleaners containing solvents,
– stainless steel cleaners,
– dishwasher detergent,
– oven sprays,
– glass cleaners,
– abrasive hard sponges and brushes,
such as pan scrubbers,
– magic erasers,
– sharp metal scrapers.
Before cleaning
^ Turn the appliance off.
^ Unplug the power cord from the wall
socket or turn the circuit breaker off
in the electrical panel.
^ Remove any food from the appliance
and store it in a cool place.
^ Take out any removable parts,
e.g., shelves, trays, drawers.
Cleaning and Care
26