Metz MECABLITZ 54 MZ-4/4I - Manual (Page 102)

ķ
102
◊ Automatic maximum flash range indication
◊ Automatic flash synch speed control
◊ Wake-up function
◊ Flash readiness indication in camera’s viewfinder
◊ Correct exposure indication in camera’s viewfinder
◊ Triggering control (Pentax, Minolta)
◊ Anti-red eye preflash (Nikon)
◊ Modelling light function
1) only possible if it can be set on the camera
2) HSS = high speed synchronisation
3) only with 54 MZ-4
4) only with 54 MZ-4i and Nikon SCA-adapter 3402-M3
5) Olympus E-1 only with 54 MZ-4i and SCA-adapter 3202-M3
54 MZ-.. with SCA 3xx adapter:
The additional special flash functions are restricted when the mecablitz
54 MZ-.. is used with an SCA 3xx adapter! The availability of individual
special functions then depends on the given camera system (camera ma-
nufacturer) and the special camera type. For more detailed information
please refer to the SCA Survey Table and the operating instructions for
the individual SCA adapters.
• TTL flash mode 1)
- Metz TTL remote mode 1)
• Manual flash mode with partial light output levels
• Automatic flash mode
- Metz auto remote mode
• Stroboscopic mode
◊ Manual flash exposure correction in A mode
◊ Flash bracketing Fb in A mode
◊ Automatic flash synch speed control
◊ Wake-up function
◊ Flash readiness indication in camera’s viewfinder
◊ Correct exposure indication in camera’s viewfinder
◊ Modelling light function
1) only possible if it can be set on the camera
54 MZ-.. with standard foot 301 (control only via hot shoe or synch cable):
• Manual flash mode with partial light output levels
• Automatic flash mode
- Metz auto remote mode
• Stroboscopic mode
◊ Manual flash exposure correction in A mode
◊ Flash bracketing Fb in A mode
◊ Modelling light function
Ǻ
704 47 0099.A3 54 MZ-4i 01.02.2007 13:41 Uhr Seite 102