Controls and features – Mercury Sable 1999 User Manual
Page 69
If the programming procedure was successful, the
new SecuriLock
key(s) will start the vehicle’s
engine. The theft indicator (located on the
instrument cluster) will light for three seconds and
then go out.
If the programming procedure was not successful,
the new SecuriLock
key(s) will not operate the
vehicle’s engine. The theft indicator will flash on and
off. Wait at least one minute and then repeat the
procedure from step 1. If failure repeats, bring your
vehicle to your dealership to have the spare
SecuriLock
key(s) programmed.
Controls and features
69