Miele H350-2B - Manual (Page 54)

The oven must be installed into
cabinetry and be supported from
underneath. A 24"
2
(150 cm
2
) vent
cut out must be made within the
cabinetry for ventilation.
Ovens with a stainless steel front
must be installed at least 36" (915
mm) above the floor.
Do not insulate the cabinet. This will
prevent proper ventilation.
^ Connect the oven to the electrical
supply.
^ Place the oven into the cabinet as far
as the oven trim and align.
^ Open the oven door and locate the
two mounting screw holes in the oven
frame. Mark and drill 6 mm pilot
holes. Secure the oven to the
cabinetry by inserting screws through
the frame and into the cabinetry. Only
operate the appliance after it has
been installed into the cabinetry.
Installing the oven
54