Simulation disc to disc, Erasing rw media – MicroBoards Technology Premium Pro Series User Manual

Page 10

DVD Premium Pro Series MICROBOARDS TECHNOLOGY, LLC

MASTER CLEAR?
(HDD)

>HDD1?
(DISC to HDD)

SIMULATION??
(DISC to DISC)

DISC ERASE?
(REWRITABLE)

4. Press the NO or ▼ button until you the screen displays MASTER CLEAR? (HDD):

5. Press the YES button
6. You can now select which hard drive partition to erase. Pressing the NO or ▼ button will

scroll you though the partition selections.

7. Press the YES button if you are sure you want to clear the HDD.
8. The hard drive will now be cleared and you will be asked if you want to register another

master to the HDD.

9. Press YES and the Reader drive will eject and you can insert another master to register

to the HDD.

10. Press NO and to exit this menu without registering data to the hard drive partition.

Simulation Disc to Disc

Important:

Simulation is not allowed when using DVD+R/RW media.

1. At the COPY START? (DISC to DISC) menu, press the NO or ▼ button until the display

shows SIMULATION? (DISC to DISC).

2. Place the Master Disc into the Reader drive
3. Place the blank disc(s) into the Recorder drive(s) and wait 10 seconds for the light(s) on

the front of the Recorder(s) to stop blinking.

4. Press

YES.

5. The drive trays will open on any recorder without blank discs installed. If you do not want

to make a copy in those drives, close the tray(s), wait for the drive light to go out, and
then press the YES button to start the copy job.

6. The display will now show the progress of the Simulation Copy Job

7. The

Recorder(s) will eject the DVD-R discs when the job is complete.

Note:

DVD-R media will NOT be recorded to in Simulation Mode.

Erasing RW media

1. At the COPY START? (DISC to DISC) menu, press the NO or ▼ button until the display

shows DISC ERASE? (REWRITABLE):

2. Load the Recorder(s) with the CD-RW or DVD-+RW media you wish to erase. You can

erase one disc at a time or fill all the Recorders to erase multiple discs at once. All discs
loaded must be of the same type.

3. Press the YES button

SIMULATION 4.0GB
DVD 25%