beautypg.com

Additional accessories, Tools storage, Suction control – Morphy Richards VC73240 User Manual

Page 4: Tube parking, Safety cut-out, Product storage, Emptying the dust canister

background image

ADDITIONAL ACCESSORIES

Attach either of the additional accessories to
either the hose handle Ó or the telescopic
tube Á as described in ‘Operating the
appliance’.

Upholstery nozzle with detachable dusting
brush

È can be separated into two parts:

Dusting brush: for pelmets, delicate objects
etc.

Upholstery nozzle: for carpet, upholstery and
stairs etc.

Crevice tool

Í for awkward places, behind

radiators etc.

TOOLS STORAGE

The crevice tool and upholstery nozzle with
detachable dusting brush can be stored on
board the hose handle for added
convenience.

The on-handle tool storage  may be
removed if not required. Push the on-handle
tool storage backwards towards the hose
and pull away E.

SUCTION CONTROL

When required, the control on the hose
handle may be slid backwards to reduce the
suction. Slide forwards for maximum suction.

TUBE PARKING

During short breaks in cleaning, the tubes
can be held in an upright, ‘standby’ position.
Rotate the floor nozzle until the lug on the
neck can be fitted into the tube standby slot

 on the rear of the appliance, whilst you
move furniture for instance.

IMPORTANT: Ensure that the appliance is
never left unattended whilst it is switched on.

SAFETY CUT-OUT

If the cleaner overheats, a motor protection
thermostat will automatically switch the motor
off. If this happens, switch the cleaner off,
unplug from the power supply and leave
the cleaner to cool for at least 60 minutes
.
Check the airways for blockages, empty the
dust canister and clean the filters before
restarting.

PRODUCT STORAGE

IMPORTANT: Always unplug the vacuum
cleaner from the electrical outlet and rewind
the power cable as directed before storing.

NOTE: Always store the vacuum cleaner
base down.

EMPTYING THE DUST
CANISTER

Empty the dust canister ¤ regularly even if it
does not look full, this will maintain the
performance.

1

Unplug the cleaner from the mains outlet.

2

Press the dust canister release button fl and
pull the canister away from the main body F.

3

Take the canister to a dustbin.

4

Hold the dust canister over the dustbin.
Press the dust canister empty button › on
the back of the dust canister. This opens the
door at the base of the canister for the
contents to be emptied-out.

4

UK Helpline 0844 871 0960

Replacement Parts 0844 873 0726

Ireland Helpline 1800 409 119

F

E

VC73240MUK Rev1_Instruction Booklet 09/02/2011 16:39 Page 4