Helpful hints – Philips Magnavox VRZ255 User Manual

Page 35

Timer Recording With the VCR Plus+ Programming System (cont’d) 35

The VCR must be off for a timer

recording to take place!

Make sure a tape is in the VCR.

Press the POWER button to turn off the VCR. The VCR
must be turned off for a timer recording to take place.
The

light will appear on the display panel. The

light and the

Cassette-Inside light will flash when you turn off the VCR if there
is not a tape in the VCR.

Press the SPEED button to select the tape speed. The
selected tape speed, SP or SLP, will appear beside REC SPEED.

Press the EXIT/STATUS button. PROGRAM WAS COM-
PLETED/PLEASE TURN OFF VCR FOR TIMER RECORDING
should appear on the screen. (If PROGRAM NOT COMPLETED
appears, begin again from step 1.) After five seconds, the on-
screen display will disappear.

• If ERROR appears at step 6 when

you select DAILY, the PlusCode pro-
gramming number you entered is
for a program that is broadcast on
Saturday or Sunday. The program
cannot be recorded repeatedly from
Monday through Friday.

• To exit the VCR Plus+ programming

system at any step, press the
EXIT/STATUS button.

• PROGRAM NOT COMPLETED/

CLASH may appear on-screen for
five seconds at step 8 if the timer
recording you programmed overlaps
with another timer recording. To
cancel the overlapping timer record-
ing, follow the steps on page 39.

Helpful Hints

• If you want to record the program one time only, go to

step 7. You may also press the Number 8/DAILY or 9/WEEK-
LY button repeatedly to select a ONE TIME PROGRAM.

• If you want to record the program daily, press the

Number 8/DAILY button. The VCR will record a program
every day from Monday through Friday, starting at the same
time and recording for the same length of time.

• If you want to record the program every week, press

the Number 9/WEEKLY button. The VCR will record a
program on the same day, at the same time, for the same length
of time every week.

Press the FF :/OK button. If the VCR PLUS+ and CABLE/TV
channel lists appear on-screen, the CABLE/TV channel has not
been set for the VCR PLUS+ channel of the program you have set
in step 4. Complete steps 6 - 7 on page 33.

DAILY PROGRAM (MON-FRI)

PROGRAM

CHANNEL +/– 12
START +/–

08:00 PM

STOP +/–

10:00 PM

REC SPEED

DATE +/–

07/31/98
FRIDAY

SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT

SPEED

CBL/DBS

VCR

EXIT/STATUS

TIMER

[

REC/OTR

REW

STILL/SLOW

–

STOP

PLAY

S.SEARCH

FF /OK

EJECT

POWER

QUICK PROGRAMMING

START

DBS

STOP

DAILY

DATE

WEEKLY

CLEAR

VOL

VCR/TV

7;;

INDEX

::7

AUDIO/MUTE

;;

–