Setting the clock (cont’d) 17 – Philips Magnavox VRZ255 User Manual
Page 17
5
4
2-3
6
1
7
Setting the Clock (cont’d) 17
5
Press the PLAY 8 or STOP 9 button repeatedly so that
AUTO flashes beside PBS CH. Then press the FF :/OK
button.
• The time will be updated at the top
of each hour (except at 11 p.m.,
midnight, 1 a.m., and 2 a.m.).
• To display the time on-screen, press
the EXIT/STATUS button. (ON
SCREEN MODE can not be set to
OFF.) Details are on page 25.
Helpful Hints
6
Press the EXIT/STATUS button.
Automatic PBS Channel Selection
4
Press the FF :/OK button repeatedly to select PBS CH.
3
Press the PLAY 8 or STOP 9 button to select CLOCK,
then press the FF :/OK button. (If AUTO CLOCK is set to
OFF, PBS CH. will not be available in the menu. If this happens,
press the FF :/OK button to select AUTO CLOCK, then press
the PLAY 8 or STOP 9 button to set AUTO CLOCK to ON.)
1
Press the VCR button, then press the MENU button.
2
Press the PLAY 8 or STOP 9 button to select INITIAL
SET UP, then press the FF :/OK button.
TIME – – : – – AM
DATE 01/01/98
AUTO CLOCK ON
PBS CH. AUTO
D.S.T. AUTO
TIME ZONE AUTO
TO SET PUSH ,9 THEN :/OK
TO END PUSH EXIT
7
An on-screen message will ask you to turn off the VCR,
and – – : – – AM will appear on the display panel.
Press the POWER button to turn off the VCR.
Auto will flash in the display panel until the clock is set. Leave the
VCR power off until the clock is set. If – – : – – appears on the
display panel after you turn off the VCR, the VCR could not find
the time. You may need to tell the VCR the PBS channel from
which to take the time. Follow the steps on page 16.
1
4
7
SPEED
CBL/DBS
TV
VCR
MENU
EXIT/STATUS
TIMER
[
REC/OTR
REW
STILL/SLOW
–
L
STOP
PLAY
:
+
S.SEARCH
FF /OK
c
EJECT
POWER
2
5
8
0
QUICK PROGRAMMING
3
6
9
START
DBS
STOP
DAILY
DATE
WEEKLY
CLEAR
CH
VOL
VCR/TV
7;;
INDEX
::7
AUDIO/MUTE
::
;;
+
–
+
–