MRV Communications LX-4000 Series - Manual (Page 50)

Appendix B - Factory Defaults
50
MRV Communications, Inc. www.mrv.com 451-0308
ppciboot Factory Default Settings
The following table lists the factory default settings.
NOTE: For defaults on specific commands, refer to the LX-Series Commands Reference Guide.
Each LX Series unit is configured at the factory to use a default set of initialization
parameters that sets all ports to operate with asynchronous ASCII terminal devices.
Main Menu Configuration Factory Default Setting
Boot from Network yes
Save boot image to flash no
Boot from flash yes
Time Out, in seconds 8
IP Configuration Menu Configura-
tion Factory Default Setting
IP Assignment method #1 DHCP
IP Assignment method #2 BOOTP
IP Assignment method #3 RARP
IP Assignment method #4 User Defined