MITSUBISHI ELECTRIC HS-U748 - Manual (Page 36)

34
HS-U748
OUT
AUDIO
L
R
VIDEO
OUT
S-VIDEO
OUT
L R L R
RECORDING PLAYBACK
AUDIO OUT L AUDIO OUT R
S-VIDEO OUT
AUDIO IN R
S-VIDEO IN
AUDIO IN L
VIDEO IN VIDEO OUT
Using the HS-U748 to playback to another VCR
1 Connect one stereo audio cable to AUDIO
IN L and R on the recording VCR, and to
AUDIO OUT L and R on the HS-U748. If the
other VCR is mono, you need a Y-adapter to
record both audio channels.
2 If the recording VCR is S-VHS, connect an
S-video cable to S-VIDEO IN on the
recording VCR and to S-VIDEO OUT on the
HS-U748.
If the recording VCR is standard VHS,
connect a yellow video cable to VIDEO IN
on the recording VCR and to VIDEO OUT
on the HS-U748.
3 Set the audio monitor on the HS-U748 to
Stereo. You should set the PerfecTape
Select in the audio and video function to
Normal to improve the quality of your copy.
See Selecting and adjusting the audio
and video functions on page 25.
4 Set the input of the recording VCR to
External.
5 Put a blank tape into the recording VCR. If
the recording VCR is an S-VHS VCR, be
sure to use an S-VHS tape.
6 Put the tape you want to copy into the
HS-U748 and find the cue point.
7 On the recording VCR, press REC, then
PAUSE.
8 On the HS-U748, press PLAY, then PAUSE.
9 Press the PAUSE buttons on both VCRs at
the same time to begin copying the tape.
10 Press STOP on both VCRs when you are
finished.
Editing Features