MITSUBISHI ELECTRIC HS-U748 - Manual (Page 27)

25
PerfecTape ® (PerfecTape)
PerfecTape function allows you to test the quality of video tapes
you will record on. After each test, the VCR adjusts its circuitry in
order to make the best possible recording on your tape. See page
43 for more information on this feature.
Selecting and adjusting the audio and video functions
1 Press AUDIO/VIDEO on the remote control to see the function
menu.
2 Press AUDIO/VIDEO repeatedly until the function you want to
adjust appears.
3 Press the ADJUST buttons on the remote to adjust the setting.
The functions will disappear if you do not press any buttons for 5
seconds.
IMPORTANT
The audio and video function menus do not appear:
• when the VCR menu is displayed
• during special effects playback
Tape function does not appear during playback.
PerfecTape Select is displayed only during playback.
PerfecTape displays only when a tape, with its erasure tab
intact, is loaded and the VCR is stopped.
2 1 3
5 4 6
8 7 9
0
AUDIO/VIDEO
ADJUST
ADJUST
VCR
Listen to: Stereo
Use ADJUST to select
Recording