Miller Electric Renegade 180 - Manual (Page 48)

OM-228 042 Page 44
12-3. Holding And Positioning Welding Gun
.
Welding wire is energized when gun trigger is pressed. Before lowering helmet and pressing trigger, be sure wire is no more than 1/2 in (13 mm)
past end of nozzle, and tip of wire is positioned correctly on seam.
S-0421-A
.
Welding wire is energized when
gun trigger is pressed. Before
lowering helmet and pressing
trigger, be sure wire is no more
than 1/2 in (13 mm) past end of
nozzle, and tip of wire is posi-
tioned correctly on seam.
1 Hold Gun And Control Gun
Trigger
2 Workpiece
3 Work Clamp
4 Electrode Extension (Stickout)
1/4 To 1/2 in (6 To 13 mm)
5 Cradle Gun And Rest Hand On
Workpiece
Groove Welds
6
End View Of Work Angle
7 Side View Of Gun Angle
Fillet Welds
8
End View Of Work Angle
9 Side View Of Gun Angle
2
3
5
4
90 ° 90 °
0 ° -15 °
45 °
45 °
1
0 ° -15 °
6 7
8 9