Magic Chef MCD1811ST - Manual (Page 13)

12
1. Program the desired cooking time.
3. Enter the amount of time you want the oven to hold.
4. Touch START pad.
The M/W indicator starts blinking and the display counts down the time remaining in M/W mode.
When the M/W cook ends, the oven will beep. The M/W indicator goes off and TIMER indicator
starts blinking. The display counts down the time remaining in KITCHEN TIMER mode. When the
KITCHEN TIMER mode ends, you will hear 3 beeps.
1. Touch KITCHEN TIMER pad.
2. Enter the amount of time you want to delay.
3. Program the desired power level and cooking time
for food to be cooked.
4. Touch START pad.
When you touch START pad, the TIMER indicator starts blinking and the display counts down the
time remaining in KITCHEN TIMER mode. When KITCHEN TIMER mode ends, the oven will beep.
The TIMER indicator goes off and M/W indicator starts blinking. The display counts down the time
remaining in M/W mode. When M/W cook ends, you will hear 3 beeps.
The TIMER indicator lights and “ : 0 ” is
displayed.
The display will show what you touched.
The M/W indicator lights and the selected
power level & cooking time are displayed.
Note : Your oven can be programmed for 99 minutes 99 seconds. ( 99 : 99 )
KITCHEN TIMER MODE
Timer operates as a minute timer, can be set to delay cooking and used to set a holding time after cooking.
However delay cooking can not be programmed for defrost. Timer operates without microwave energy.
1. Touch KITCHEN TIMER
pad.
2. Enter the amount of time you want to count down.
3. Touch START pad.
The TIMER indicator starts blinking and the display counts down the time remaining in KITCHEN
TIMER mode. When KITCHEN TIMER mode ends, you will hear 3 beeps.
The TIMER indicator lights and “ : 0” is
displayed.
The display will show what you touched.
HOW TO USE AS A MINUTE TIMER
HOW TO USE TO DELAY THE START OF COOKING
2. Touch KITCHEN TIMER pad.
The M/W indicator lights and the selected
time is displayed.
The TIMER indicator lights and “ : 0” is
displayed.
The display will show what you touched.
HOW TO USE TO SET A HOLDING TIME