Motorola CLP1010 - Manual (Page 15)

RADIO OVERVIEW
7
OPERATION WITH MENU SETTINGS
Press Menu button to navigate through the Menu settings. Voice Assisted Operation feature is available on
selected models. At any time in Menu mode, short press PTT or wait 3 seconds to exit the menu.
HOW TO... STEP 1 STEP 2
Change Channel Press Menu button to navigate to Channel. Press +/- button to change
channel.
Enter Monitor Mode Press Menu button to navigate to Monitor. Press +/- button to activate or
deactivate Monitor.
Enter Scan Mode Press Menu button to navigate to Scan. Press +/- button to activate or
deactivate Scan.
Send Call Tone (enabled
through CPS) Press Menu button to navigate to Call
Tone. Press +/- button to send Call
Tone.
Quick Tip: It is not necessary to wait for the voice prompt to be completed before continuing with next button press.
Note: For single channel models, only Monitor mode is available from Menu list. To activate, press and hold the Menu button; to
deactivate, press and hold the Menu button again.