MITSUBISHI ELECTRIC Mitsubishi Electric Laservue L75-A94 - Manual (Page 22)

22 3. TV Features
For assistance call 1(877) 675-2224
Using ChannelView Listings
Task Action
Display/hide
ChannelView listings
(ANT input only). Press GUIDE.
Move through channels
one by one. Press or .
Move through channels
quickly. Press and hold CH.
Jump to listings for a
specific channel. Enter the channel number.
Press CANCEL once to add a
dash; press CANCEL twice to
clear the channel number.
Tune to a highlighted
channel. Press ENTER.
Update program infor-
mation for a highlighted
digital channel. Press the INFO key (the
screen may briefly go
blank).
Display program descrip-
tions, if available. The
description will appear at
the bottom of the screen. 1. Press to move into
the program area.
2. Press to move
between programs.
Display more program
description for the current
channel (if available). Press INFO.
Ch annelView Channel Listings
Chann elView Custom Channel Banks
Select a channel bank to customize.
1. Press GUIDE to display ChannelView.
2. Press MENU to move the highlight to the bank
header.
3. Press to select Bank 1, 2, or 3.
4. With the bank name highlighted, press ENTER to
enter setup mode where you can select channels to
include in the bank.
Task Action
Move between banks Press .
Move into the channel list Press .
Add or delete a channel
from the bank • Highlight the channel
and press ENTER. A
check indicates the
channel has been
added.
• Press ENTER again to
clear the check and
remove the channel.
Remove all channels
from the selected bank Press CANCEL.
Enter or exit setup mode Press MENU.
5. Press EXIT when finished with setup.
Using Custom Channel Banks
• While watching TV, press CH. The TV will tune only
to channels stored in the current bank.
• To change to a different channel bank:
1. Press GUIDE.
2. Press MENU.
3. Press to highlight the desired bank.
4. Press EXIT.
• To allow tuning to any channel in memory, select
the All bank.
ChannelView, “All” tab. Programs are listed on the right.
ChannelView displays program descriptions sent by broad-
casters. This information may be unavailable in some
areas. In addition, many cable companies do not send
program information with every digital channel. In such
cases, ChannelView cannot display channel information.
About ChannelView
ChannelView™ shows memorized channels on the ANT
input. It displays channel names and program information
for digital channels. No program information is displayed for
analog channels.
ChannelView allows you to set up three banks of custom chan-
nels for convenient access. You can save groups of channels
by content (e.g., news, sports, children’s programming) or by
TV user.
Note: You must fi rst set the TV Clock to receive
ChannelView listings. Use the Setup > Clock menu.