Motorola SURFBOARD SBG900 - Manual (Page 10)

10 Wireless Cable Modem Gateway SBG900
C. USB Connection
You can connect a single PC running Windows 98, Windows Me,
Windows 2000, or Windows XP to the SBG900 USB port. The USB connection
requires special driver software supplied on the SBG900 Installation CD-ROM.
1
Insert the SBG900 Installation CD-ROM into the CD-ROM drive.
2 Run the Installation Assistant. Choose USB as your connection.
Be sure the SBG900 is not connected to your PC.
3 Connect the SBG900 to the cable TV system as described in Section A.
4 Install the USB driver software.
5 Restart your PC.
6 Connect the USB cable to the
USB
port on the SBG900.
7 Connect its other end to the USB port on the PC.
If you experience problems with the USB connection, click Uninstall USB
Driver on the Installation Assistant Getting Started page to uninstall the USB
driver. If necessary, you can install the USB driver following the instructions in
the SBG900 User Guide.