Maxtor 52049H3 User Manual

Page 23

INSTALLATION

4 – 3

Figure 4 - 2

Single Pack Shipping Container (Option A)

Figure 4 - 3

Single Pack Shipping Container (Option B)

Repacking

If a Maxtor drive requires return, repack it using Maxtor packing materials, including the antistatic bag.

Physical Installation

Recommended Mounting Configuration

The Maxtor hard drive design allows greater shock tolerance than that afforded by larger, heavier drives. The
drive may be mounted in any attitude using four size 6-32 screws with 1/8-inch maximum penetration and a
maximum torque of 5-inch pounds. See Figure 3-1 for mounting dimensions. Allow adequate ventilation to
the drive to ensure reliable operation. See the following pages for specific installation steps.

This manual is related to the following products:

53073H4 546106 51536H2