Memorex MMP8500 - Manual (Page 20)

OPERATION (CONTINUED)
19
Make sure the PRESET indicator does not
appear in the display. If it does, press the
PRESET/Power button and the PRESET
indicator will disappear.
1
TO AUTOMATICALLY SET STATIONS INTO MEMORY
Press and hold the Function switch until “AUTO
SCAN” appears in the display. The unit will
automatically store the ten next strong stations
into memory. New FM Stations will overwrite
previous presets.
NOTE: If less than ten stations have been
scanned into the memory, the memory will keep
at a frequency with 87.5MHz
2
Press the Preset/POWER On-OFF/Stop
button
❶ ; “PRESET” will appear in the display.
Select a preset number by pushing the
Function switch towards ❷ or ❸ .
Press the Preset/POWER On-OFF/Stop
button
❶ to exit the preset mode, ”PRESET”
indicator will not disappear from the display
3
2
1
1
TO RECEIVE MEMORY PRESETS