Mr. Coffee URX33 - Manual (Page 9)

51
6.)
Remove the water reservoir by gasping the hand
holds in the back of the reservoir, and pulling up. Fill it
with the desired amount of tap water. Replace the
reservoir on the coffeemaker, making sure that it is
firmly attached to the coffeemaker body
Make sure the reservoir is squarely centered
on the coffeemaker or the water may overflow.
An overflow may cause personal injury or
damage to property.
Use the water window marks to measure the water,
not the decanter marks The decanter marks
measure brewed coffee only
Place the decanter on the warming plate.
Make sure the decanter is squarely centered
on the warming plate or the water and
grounds will overflow from the brew basket.
An overflow may cause personal injury o r
damage to property.
To reduce the risk of damaging the decanter
and/or the risk of personal injury, do not add
cold water to the decanter if the decanter is
already hot. Allow the decanter to. cool
before using.
Do not brew coffee while the brew basket lid
is open.
Brewing coffee now
For models URI 2 and URI 3:
Press the ON button.
The ON indicator will light, indicating that the
coffeemaker is on and the brew cycle will begin.
When the coffee stops flowing, the brew cycle is
complete.
W h i l e the coffee i s brewing, the Pause N’ Serve
feature allows you to sneak a cup of coffee from
the decanter. REPLACE THE DECANTER ON THE
WARMING PLATE WITHIN 30 SECONDS TO
PREVENT OVERFLOW AND POSSIBLE INJURY
To turn off the coffeemaker, press the OFF button.
If the brew basket overflows or fails to empty
mto the decanter, do not open the brew
basket. Unplug the coffeemaker and wait for
the contents to cool before handling.