Mr. Coffee URX33 - Manual (Page 11)

3.) While still pressing and holding the PRESS HOLD
button, press and hold the Min. button until the
clock displays the correct minute.
4.) Release the PRESS HOLD button.
5 ) Press the DELAY BREW button.
The Delay Brew indicator will light. The delay
timer is set and the coffeemaker will begin
brewing the coffee at the time you selected.
,
If You want Your coffee t o brew at the same time
the folIowIng day, simply add the desired amount
of ground coffee, fill the water reservoir and press
the DELAY BREW button
Adjusting the warming plate temperature
(models URX30 and URX33 only)
You can adjust the warming plate temperature to five different settings, from warm
to very hot.
To adjust the warming plate temperature:
Press the Min. button to lower the temperature
of the warming plate. Press the Max. button to
raise the temperature of the warming plate.
Cleaning the coffeemaker between brew cycles
To clean up the used coffee grounds and filter:
I
.) Discard the grounds and paper filter and rinse the
filter basket. You may also wash the filter basket in
the dishwasher (top rack dishwasher safe only).
2 ,) Rinse the decanter with warm water. You may also
wash the decanter in tie dishwasher (top rack
dishwasher safe only).
Make sure the coffeemaker is turned off when
the decanter is empty.
Brewed coffee and grounds are both very hot.
Handle them with care to avoid scalding injuries.
Unplug the coffeemaker’s power cord if you
are not using the coffeemaker or clock.
C
7