Meridian America 541 - Manual (Page 59)

Setting up sources
53
To use a source key to change preset
You can use the unused source keys on the remote to change
the preset for your current source.
For example, you can make the CDR key on the remote switch
the preset to Stereo for comparison, whatever source you are
listening to:
● Configure the source key you are going to use with the
required preset, and the Audio input set to Last Valid.
For example: Source CDR, Preset Stereo, Label CDR, Audio
input L.V.Audio, Audio sensitivity 2.5V In, Video input L.V.Video,
Function Select Last F.S.
Selecting the CDR source key will now switch the preset to
Stereo, leaving all other settings unchanged.
To set up a system with two Meridian
CD players
● Configure the source you are going to use for the first CD
player.
For example: Source CD, Preset Music, Label CD, Audio input
A2, Video input L.V.Video, Function Select Last F.S., Comms
type 1C, Address 1A.
● Configure the source you are going to use for a second CD
player, with a different address.
For example: Source CDR, Preset Music, Label CDX, Audio
input A3, Video input L.V.Video, Function Select Last F.S.,
Comms type 1C, Address 2A.
The remote control will now automatically control whichever of
the CD players you have selected with the CD or CDR source
keys.