Meridian America 541 - Manual (Page 24)

Using the surround controller
18
Recording a source
The 541 Surround Controller allows you to copy any of the
standard sources to the tape and VCR outputs, independently of
the source you are listening to.
If you are using the 541 Surround Controller in a two-room
system, you copy a source to the tape output to make it
available to the second room.
To copy a source
● Press Copy.
Each time you press Copy the surround controller will step
between the options shown in the table opposite.
For example, to record the television picture and sound on a
VCR:
● Press Copy until the display shows:
Copy TV
You can now listen to a CD, by selecting the CD source, without
affecting what is being recorded.
Display Option
Copy Source
The current audio and video inputs
are fed to the tape/VCR outputs.
Copy Mute
The tape and VCR outputs are
muted.
Copy CD
Copies the first source to the tape
and VCR outputs.
Copy Radio
Steps through each source in turn,
etc.