MITSUBISHI ELECTRIC NETCOMMAND 2.0 HD-5000A - Manual (Page 14)

14
Guide Button
(Figure 13, page 13)
The GUIDE button displays the on-screen programming
guides.
• For NetCommand® compatible satellite receivers and
some cable boxes, the GUIDE button will display the
on-screen programming guide for the receiver or cable
box. Use the ADJUST and ENT(er) buttons to navigate
the displayed Guide. For NetCommand compatible
satellite receivers, you may also be able to use the
number or other additional buttons.
• For NetCommand compatible DVD players, the
GUIDE button will display the DVD disc menu (not
the setup menu).
• For Ant-DTV and IEEE  devices, pressing the
GUIDE button will display the Digital Channel Guide
showing the sub-channels, or bitstreams for the current
channel or device. For Ant-DTV only the sub-channels
for the current channel are seen first. Press ADJUST
or to see all the channels in memory.
• For compatible traditional VCRs, pressing the GUIDE
button when the VCR is highlighted on the Device
Selection menu, will change the VCR’s input.
• For IEEE  AV Discs, pressing GUIDE will display
the Track List screen (Figure ).
• For selected NetCommand compatible A/V Receivers:
Display the device selection menu. Press Audio to move
the navigation to the audio section and highlight the
A/V Receiver icon. Pressing Guide will now switch
from analog audio to digital audio and vice versa.
Guide Button, AV Disc Search, Track List Screen
Track List Screen
(Figure 14)
When viewing an IEEE  AV Disc, press the GUIDE
button to display the Track List screen. This screen
provides a list of tracks for the AV Disc, the time and date
the track was added, its duration, and the title of the track.
Tracks will be listed in time order with the most recent
recording listed first. Track Lists vary in size. Press
ADJUST or to navigate through the Track List. To
play a track, select it on the list, then press ENT(er). Press
CH or to change pages of the list.
Once a track is selected, the first program begins to play.
If there are multiple programs in the track, the names
are displayed. Another program for the same track can
then be selected. A track must be playing for the multiple
programs to be displayed. To delete a track, select it, then
press CANCEL. If the track includes multiple programs,
all of them will be deleted.
Figure 14. Track List screen
AV Disc Search
NetCommand is able to search to a specific time in an
IEEE  AV Disc recording.
. Start the playback of the desired track on the AV disc.
. Use the number buttons to enter the time code
position of hours followed by minutes. For example,
to enter one hour and twenty-two minutes (:) into
the track, enter , , .
. Press ENT(er) to skip to the time code position.
. To cancel the request or to start over, press CANCEL
instead of ENT(er).