Marantz DLP PROJECTOR VP-12S2 - Manual (Page 31)

27
ENGLISH
This unit has 4 picture modes, Theater, Standard, Dynamic, User, for your choice. You can choose one with the direction buttons
on the unit or on the remote.
• Theater : This mode is designed for high fidelity black appearance and is good for movie pictures.
• Standard : This mode is good for normal pictures.
• Dynamic : This mode is good for visually dynamic pictures.
• User :
This mode allows you to adjust your favorite gamma curve.
Note : It is possible to download the software for making the gamma curve from our web.
Also, each mode has 3 User Memories and Default. If Default is set, you cannot select "Picture Adjust" and "Display" in the menu.
– Store memory
From the menu above, select "Memory" and choose one memory mode from 1-3 for either "Theater", "Standard", "Dynamic" or
"User" with the remote controller. Picture Adjust menu will be displayed. Adjust the picture and the adjustment settings will be
stored in the memory automatically.
❖
Setting the Memory Menu
1. Use
3 / 4
key to adjust.
2. Use
1
key to go back to the menu item.
❖
Lamp Life
Display the remaining lamp life by pressing the INFO. key on the remote controller.
Notes:
• The maximum life limit of the lamp is 2,000 hours. Although we care very much about quality, the lamp can rarely breaks down if
running time exceeds 1,000 hours. Therefore we recommend to replace the lamp if Lamp Life gets under 1,000 hours. The lamp
cannot be used exceeding the maximum life limit.
• This product is checked under strict quality control when it is shipped out form factory.
“Total Hours” in the menu includes the time for this check. So “Total Hours” may not be 0 hours when it is used first time.
Video Input Component-1080i
Memory Standard 2
Cinema Mode Auto
Noise Reduction 0
Aspect Full
Trigger 2 On
Lamp Life 921 Hours
Total Hours 3653 Hours
Lamp Life and Replace Lamp
1.
2.
1.
2.
Mode Standard
2 Picture Adjust
Setting
Display
Config
Trigger 2
Memory
Memory