Muratec F-116 - Manual (Page 59)

Troubleshooting_ 58
2. Gently pull the paper out of the output tray.
If you do not see the jammed paper or if there is any resistance when you pull, stop and go to the next step.
3. Open the rear door.
4. Pull the pressure levers down and remove the paper.
If you do not see the jammed paper, go to next step.
5. Pull the fuser cover levers down and remove he paper.
Return the pressure levers to their original position.
The fuser area is hot. Take care when removing paper from the machine.
6. Close the rear door.
7. Open and close front door, printing automatically resumes.
1 Pressure lever