Memorex MT2245 - Manual (Page 16)

15
Follow the instructions below to connect an S-VIDEO VCR to your television using an S-video cable.(CABLES NOT
INCLUDED.)
1. Connect the cable, satellite or incoming antenna to the ANT jack on the rear of the VCR.
2. Connect the left and right audio cable from the VCR’s Audio OUT jacks to the TV’s AV1 left and right Audio IN jacks.
3. Connect the VCR’s S-VIDEO OUT jack to the TV’s S-VIDEO IN jack.
4. Press the AV button until VIDEO1 appears on the TV screen and press PLAY on the VCR to watch a tape.
REAR OF TV
VCR
VIDEO Cord
To TV
AV1 VIDEO
jack
To TV S-VIDEOjack
From VCR S-VIDEO
OUT jack
From VCR VIDEO OUT jack
INCOMING CATV CABLE
1. Connect the left and right audio cable from the TV’s Audio OUT jacks to the VCR’s left and right Audio IN jacks.
Connect the TV’s video OUT jack to the VCR’s video IN jack.
Refer to your VCR’s manual for more information on this connection.
REAR OF TV
RECORDING VCR
AUDIO/VIDEO Cord
From TV OUT jacks
To VCR IN jacks
INCOMING CATV CABLE
Follow the instructions below to connect a second VCR to Record from the TV. (CABLES NOT INCLUDED.)
VCR CONNECTIONS (CONTINUED)