Murray 309001x18A - Manual (Page 18)

OPERATION
18 F–030610L
HOW TO INSTALL THE SIDE DISCHARGE ATTACHMENT
WARNING: To prevent the engine from starting, dis-
connect the wire from the spark plug. Make sure the
blade rotation control is in the DISENGAGE position.
The mulcher cover lets you mulch the grass for a clean, fine cut.
To discharge the grass out the side, install the side discharge
attachment as follows.
1. Remove the two wingnuts that secure the mulcher cover (see
Figure 12).
2. Lift the mulcher cover. Mount the side discharge attachment
onto the same bolts that secured the mulcher cover.
3. Secure the side discharge attachment with the wingnuts.
4. To mulch, remove the side discharge attachment and mount
the mulcher cover to the mower housing with the wingnuts.
Figure 12
Side Discharge Attachment
Mulcher Cover
Wingnut
Wingnut