Audio/video settings menu: overview, Audio/video settings menu, Tv speakers – MITSUBISHI ELECTRIC WT - 42313 User Manual

Page 55: Audio output, Audio settings and video settings

AUDIO/VIDEO SETTINGS Menu: Overview

AUDIO/VIDEO SETTINGS

Menu

(Figure 53)

Each input has its own A/V memory. You can adjust

each input’s A/V memory in two ways. You can use

the menu or the remote control.

A/V Memory Reset

A/V Memory Reset will return the currently selected

input’s A/V memory to the factory settings. To reset

an input’s A/V memory, select A/V Memory Reset,

select the input you want to reset, and press ENTER.

TV Speakers

This selection will turn on or off the TV’s internal

speakers. You may select Off when sending the sound

through a separate stereo system or surround sound

A/V receiver.

Audio Output

Select Fixed if your audio receiver or stereo system can

be controlled with a remote. This allows you to adjust

the volume with the system’s remote control or the TV

remote control, if compatible. This setting is better

for surround sound receivers. Select Variable if your

audio receiver or stereo system cannot be controlled

with a remote. This allows the TV’s internal circuitry

to adjust the volume.

AUDIO SETTINGS and

VIDEO SETTINGS

(Audio Settings, Figure 54)

After selecting AUDIO SETTINGS or VIDEO

SETTINGS, you can adjust the settings by pressing

, , , or . For descriptions of the individual A/V

settings, see AUDIO/VIDEO Setting Descriptions,

pages -.

Using the AUDIO and VIDEO Buttons on the Remote Control

1. Press AUDIO or VIDEO to cycle through the available settings.

2. Press or to adjust the setting. After 5 seconds of inactivity, the setting display will disappear.

ENTER for menu or to start
MENU to return

�� 

��
��

��

�

��

�

��

�� 

�

��

Figure 53. AUDIO/VIDEO SETTINGS menu

ENTER for menu or to start
MENU to return

�� 

��
��

��

�

��

�

��

�� 

�

��

Figure 54. AUDIO SETTINGS

This manual is related to the following products:

WS - 48313