McIntosh MCD201 - Manual (Page 17)

17
ing the DSP/TIME Push-button on the Remote
Control. Refer to figure 12.
How to Play a CD Disc
With a disc already loaded into the MCD201, press the
PLAY Push-button on the Front Panel of the MCD201 or
Remote Control. Refer to figures 5, 6, 10 and 12.
How to Pause a Disc
This feature allows for the temporary stopping of disc
playback. Refer to figures 6 and 11.
1. When playing a Disc, press the PAUSE Push-button
to temporarily stop playback.
2. Press the PLAY Push-button or press the PAUSE
Push-button a second time to cancel Pause and resume
playing the disc.
Track Back
Return to the beginning of the Track currently playing
by rotating the MCD201 Front Panel TRACK BACK 
Control counterclockwise and then releasing the control
or momentarily pressing the BACK  Push-button on
the Remote Control. Rotate and hold the TRACK BACK

Control or press and hold the BACK  Push-button
for rapid selection of the desired previous Tracks. Refer to
figures 6 and 12.
Track Next
Advance to the next Track by rotating the MCD201 Front
Panel TRACK NEXT  Control clockwise and then re-
leasing the control or momentarily pressing the NEXT 
Push-button on the Remote Control. Rotate and hold the
TRACK NEXT  Control or press and hold the NEXT

Push-button for rapid selection of the next desired
Track. Refer to figures 6 and 12.
Fast Forward or Reverse
Press and release the FF (Fast Forward)

or REV (Re-
verse)

Push-button to search back and forth rapidly
How to Operate the MCD201
through a Track on a disc at 4 times
the normal speed. To return to
normal playback, press and release
the same FF (Fast Forward)

or
REV (Reverse)

Push-button, press
the PLAY or press the PAUSE
Push-button. Refer to figures 6 and
12.
Note: The Fast Forward and Reverse
Modes work within the track
playing.
Stop Mode
Press the STOP Push-button at
any time to stop Playback. To listen
to the disc again, press the PLAY
Push-button and playback will start
from the beginning of the disc.
Volume Level
The MCD201 has both Fixed and
Variable Output Level Connections.
The Variable Output Level Connec-
tions (Rear Panel and Front Panel
Headphone Jack) are controlled by
the Front Panel Level Control and
the Level Push-buttons on the Re-
mote Control. Refer to figures 6, 12
and 13. When the Level Control or
Push-buttons are operated, the Front
Panel Information Display will indicate the Volume Level
from 0 - 100%. Approximately 3 seconds after making any
changes to the Volume Level, the Information Display will
return to the previous indication.
Notes: 1. Wait until the Information Display returns to pre-
“Volume Level Adjustments” indication before enter-
ing any new operational commands.
2. When the Volume Level is 81%, the Rear Panel Vari-
able Outputs will be at the same volume level as the
Fixed Outputs.
Figure 12
Figure 13
Figure 10
Figure 11