Motorola HF850 - Manual (Page 9)

7
Installation Procedure
Caution: This car kit must be connected to a maximum 5A
fuse in the car fuse panel to prevent fire or other damages if a
short circuit should occur somewhere in the Junction Box.
Before installation, unpack, assemble, and test all
components on a service bench.
Installing the Bluetooth
®
Junction Box
Mount the box using the screws provided.
The best location for the Bluetooth junction box is under the
dash. The box must be protected from dirt and moisture and
have adequate space for cooling and to allow for cable
connection.
For optimal Bluetooth performance, mount the junction box
so that the side with the barcode faces away from the
mounting surface.
The location MUST NOT interfere with the vehicle’s air bag
deployment.