beautypg.com

Gaw-135h — installation – Multiquip PORTABLE DC WELDER/AC GENERATOR (GASOLINE ENGINE) GAW-135H User Manual

Page 22

background image

PAGE 22 — GAW-135H DC WELDER/AC GENERATOR — OPERATION MANUAL — REV. #0 (06/23/04)

Connecting the Ground

The nut and ground terminal on the generator should always be used to connect the generator to a suitable ground. The
ground cable should be #8 size wire minimum.

At the generator, connect the terminal of the ground cable between the lock washer and the nut (Figure 4) and tighten the
nut fully. Connect the other end of the ground cable to a suitable earth ground (ground rod).

GAW-135H — INSTALLATION

Figure 4. Generator Grounding

This manual is related to the following products:
See also other documents in the category Multiquip Generators: