MACKIE X.200 - Manual (Page 7)

7
Quick-Start Guide
Quick
-Star
t Guide
15. Power Switch
This one is self-explanatory. When the POWER
switch is turned ON, power is supplied to the Digital
X Bus and it boots up. When turning off the Digital
X Bus, you should select Shutdown from the File
menu. At the end of the shutdown procedure, the
touchscreens go blank, indicating that it is okay to
turn off the power switch.
More Connections
There are even more connections available behind
the removable panel on the back of the Digital X
Bus, which we call the Motherboard Access Area.
These are connections to the motherboard, and
include four additional USB connections, and the
PS/2-style mouse and keyboard connections.
To access the connectors:
1. First, turn off the Digital X Bus (select File >
Shutdown and then turn off the power switch).
2. Use a Phillips screwdriver to remove the eight
screws securing the panel to the chassis.
16. Mouse
This 6-pin miniDIN connector is used to connect a
PS/2-style mouse.
17. Keyboard
This 6-pin miniDIN connector is used to connect a
PS/2-style keyboard.
18. USB
These are four additional USB ports for connect-
ing more USB devices to the Digital X Bus. If you
are connecting a USB CD-ROM drive, use one of
these ports rather than the USB ports on the rear
panel (13).
MOUSE
KEYBOARD
USB PORTS