M-S Cash Drawer A794 - Manual (Page 90)

A794 Owner’s Guide Chapter 6: Programming Information
December 1999 85
Copy Character Set from ROM to RAM
ASCII ESC : 0 0 0
Hexadecimal 1B 3A 30 30 30
Decimal 27 58 0 0 0
Default: current active ROM Code Page
Copies characters in the active ROM set to RAM. Use this command to re-initialize the
User-Defined Character Set. Code Page 437 is copied by default at initialization.
This command is ignored if current font is the user font.
Related Information
To modify characters in one of the character set variations, such as Rotated Print, select
one of the Rotated Print commands, copy to RAM, then use the Define User-Defined
Character Set command (1B 26).
Cancel User-Defined Character
ASCII ESC ? n
Hexadecimal 1B 3F n
Decimal 27 63 n
Value of n: Specified character code.
Range of n: 32-255
Cancels the pattern defined for the character code specified by n. After the user-defined
character is canceled, the corresponding pattern from current active ROM Code Page is
printed.
Exceptions
This command is ignored if n is out of range or if the user-defined character is not
defined.