M-S Cash Drawer A794 - Manual (Page 108)

A794 Owner’s Guide Chapter 6: Programming Information
December 1999 103
Transmit Paper Sensor Status
ASCII ESC v
Hexadecimal 1B 76
Decimal 27 118
Values:
Status Byte
(RS-232)
Bit Function 0 Signifies 1 Signifies
0 Receipt Paper Present Low (only if paper low
sensor is enabled)
1 Receipt Cover Closed Open
2 Receipt Paper Present Out
3 Knife Position Home Position Not Home Position
4 Not Used Fixed to Zero Fixed to Zero
5 Temperature In valid range Too hot or too cold
6 Voltage In valid range Too high or too low
7 Not Used Fixed to Zero Fixed to Zero
Sends status data to the host computer. The printer sends one byte to the host computer
when it is not busy or in a fault condition. In DTS/DSR protocol, the printer waits for
DSR = SPACE..
Related Information
See Busy Line and Fault Conditions in the Real Time Commands section of this
document for details about fault condition reporting.
In TM-T88 Emulation, this command is ignored.