Out in, Dvd in out, Moni.out tv out in cb – Marantz SR6400 User Manual
Page 17: Pb cr, Pr cr, Pr cb, Pb cb, English, Connecting the antenna terminals, Assembling the am loop antenna
14
ENGLISH
CONNECTING THE ANTENNA TERMINALS
AUDIO
COMPONENT VIDEO
DIGITAL OUT
DIGITAL IN
OPT.
COAX.
ANTENNA
SERIAL NO.
AC IN
AC OUTLET
120V 60HZ
SWITCHED
1A 120W MAX
UNSWITCHED
1A 120W MAX
FRONT A
SURROUND
BACK
FRONT B
CENTER
SURROUND
SPEAKER SYSTEMS
FRONT A OR B, CENTER, SURROUND, SURR. BACK : MINIMUM 6 OHMS
FRONT A AND B : MINIMUM 8 OHMS
L
R
L
R
L
R
6
5
4
1
2
3
6.1CH
IN
IN
OUT
TAPE
CDR/MD
OUT
SW
OUT
IN
CD
C
SB
SL
L
IN
OUT
IN
R
TV
DVD
DSS/VCR2
R
SR
L
VCR1
OUT
IN
RC-5
PRE
OUT
SR
SW
R
L
SL
C
SB
DVD
TV
MONI.
VIDEO
VCR1
OUT
OUT
IN
DSS/VCR2
OUT
IN
VCR1
DSS/VCR2
DVD
IN
OUT
S-VIDEO
MONI.OUT
TV
OUT
IN
CB
/
PB
CR
/
PR
CR
/
PR
CR
/
PR
CB
/
PB
CB
/
PB
DVD
Y
Y
MONI.OUT
DSS/VCR2
Y
FM (75
Ω)
GND
AM
RS-232C
ANTENNA
FM (75
Ω)
GND
AM
FM FEEDER
ANTENNA
FM EXTERNAL
ANTENNA
AM LOOP
ANTENNA
AM EXTERNAL
ANTENNA
ASSEMBLING THE AM LOOP ANTENNA
1.
Release the vinyl tie and take out the connection
line.
2.
Bend the base part in the reverse direction.
3.
Insert the hook at the bottom of the loop part
into the slot at the base part.
CONNECTING THE SUPPLIED ANTENNAS
Connecting the supplied FM feeder antenna
The supplied FM feeder antenna is for indoor use
only.
During use, extend the antenna and move it in
various directions until the clearest signal is received.
Fix it with push pins or similar implements in the
position that will cause the least amount of distortion.
If you experience poor reception quality, an outdoor
antenna may improve the quality.
Connecting the supplied AM loop antenna
The supplied AM loop antenna is for indoor use
only.
Set it in the direction and position it to where you
receive the clearest sound. Put it as far away as
possible from the unit, televisions, speaker cables,
and power cords.
If you experience poor reception quality, an outdoor
antenna may improve the quality.
1.
Press and hold down the lever of the AM antenna
terminal.
2.
Insert the bare wire into the antenna terminal.
3.
Release the lever.
CONNECTING AN FM OUTDOOR ANTENNA
Notes:
• Keep the antenna away from noise sources (neon
signs, busy roads, etc.).
• Do not put the antenna close to power lines. Keep
it well away from power lines, transformers, etc.
• To avoid the risk of lightning and electrical shock,
grounding is necessary.
CONNECTING AN AM OUTDOOR ANTENNA
An outdoor antenna will be more effective if it is
stretched horizontally above a window or outside.
Notes:
• Do not remove the AM loop antenna.
• To avoid the risk of lightning and electrical shock,
grounding is necessary.
4.
Place the antenna on stable surface.
CONNECTING THE ANTENNA WIRE TO THE
ANTENNA CONVERTER
Loosen the screws and fix the terminals of wire.
Then tighten the screws with a screwdriver.