Motorola SURFboard SB6121 - Manual (Page 29)

2 INSTALLATION
22
Verifying the IP Address in Windows 2000 or Windows XP
Do the following to check the IP address:
1. On the Windows Desktop, click Start.
2. Select Run.
3. Type cmd and click OK to display a command prompt window.
4. Type ipconfig and press Enter to display the IP configuration information. A display
similar to the following indicates a normal configuration.
5. If, as in the following window, an Autoconfiguration IP Address is displayed, there
is an incorrect connection between the PC and the SB6120, or there are
broadband network problems.
6. At the command prompt, type ipconfig /renew and press Enter. If a valid IP address
is displayed as shown, Internet access should be available.
7. Type exit and press Enter to return to Windows.