Motorola SURFboard SVG1501E - Manual (Page 42)

B
6 • Advanced Pages 32
Field Description
PPTP PassThrough Enables the Point-to-Point Tunneling Protocol (PPTP) Pass-
Through protocol to be used through the SVG1501
Configuration Manager so that a VPN device (or software)
may communicate properly with the WAN.
Select Enable to turn on.
Remote Config Management Allows remote access to the SVG1501 Configuration
Manager. This enables you to configure the SVG1501 WAN
by accessing the WAN IP address at Port 8080 of the
configuration manager from anywhere on the Internet. For
example, in the browser URL window, type
http://WanIPAddress:8080/ to access the SVG1501
Configuration Manager remotely.
Select Enable to turn on.
Multicast Enable Allows multicast-specific traffic (denoted by a multicast
specific address) to be passed to and from the PCs on the
private network behind the configuration manager.
Select Enable to turn on.
UPnP Enable Turns on the Universal Plug and Play protocol (UPnP) agent
in the configuration manager. If you are running a CPE
(client) application that requires UPnP, select this box.
Select Enable to turn on.
Rg PassThrough Disables NAT operation allowing all client computers to act
as passthrough clients.
Select Enable to turn on.
PassThrough Mac Addresses Specifies up to 32 computers as passthrough clients not
subject to NAT, using their MAC addresses.
To enable this feature, your cable operator may need to
provide additional public IP addresses.
Click Apply to save changes.