Philips Magnavox MDV560VR/17 - Manual (Page 23)

English
1100
Use V V to choose the SPEED option.
Use b b/B B to choose between AUTO, SP or
SLP.
" AUTO mode determines how much tape is left and
switches speed from SP to SLP, if necessary, to complete
recording the program. There will be some picture and
sound distortion at the point of the speed change.
1111
Use V V to choose the REPEAT option.
Use b b/B B to choose between ONCE, WEEKLY
or DAILY events.
ONCE ....for recording up to 8 programs on a single day
or other days up to 1 year.
WEEKLY ....for recording up to 8 programs on a certain
day of every week.
DAILY ....for recording up to 8 programs at the same
time(s) from Monday through Friday.
Tip
If the input data is wrong, use v
v to select the data
and correct it using b b/B B.
1122
Press MENU, the program will be memorized
at the DVD+VCR.
" indicator lights in the display window.
" If the program preset time is past, a ‘PAST TIME PRO-
GRAMMED’ message will appear on the TV screen.
Return to the incorrect program and update it with the
correct time.
" If you had entered a past date, the timer recording will
be performed on that date for the next year.
" Additional programs may be entered by repeating steps
1-12.
Cable Users: If your cable hookup is via a TV converter
box, you can program multiple recordings only on the con-
verter box output channel. This is because the converter
must be kept on the channel you view through your
DVD+VCR.
Tip
When finished programming and you want to set the DVD+VCR to
record the programs you have entered.
MAKE SURE YOU HAVE INSERTED A TAPE INTO THE
DVD+VCR. The DVD+VCR is now set to record the preset pro-
grams.
Note
If the power fails or the DVD+VCR is unplugged from the AC
outlet, the correct clock time and timer settings are kept in memory
for about 3 seconds. After 3 seconds, the clock and program timer
will be reset when power is restored. Reset the clock according to
instructions.
After setting up a timer recording, recording will start if no other
timer recordings are scheduled to occur at the same time (see
“Program Priority” in next section).
Checking (Erasing) the Timer Program
Programming can be checked whenever the DVD+VCR is
turned on.
1 Press SYSTEM MENU and the MAIN menu will appear.
2 Use v/V to choose the PROGRAM menu.
Press ENTER and the PROGRAM menu will appear.
3 Use b/B to select a program you want to check or
erase. If you want to erase the program, press CLEAR.
4 Press MENU to return to the TV screen.
Program Priority
If the starting and ending times of two or more timer
recordings overlap on the same
day, priority is given to the earli-
est recording. For example, in
the diagram at left Program num-
ber 2 will not be recorded until
Program number 1 is finished.
The first part of Program number
2 will not be recorded. Likewise,
Program number 3 will not be recorded until Program num-
ber 2 is finished, and so on.
Operation 23