Murray 20-inch Push - Manual (Page 11)

ASSEMBLY
11 F-050406L
Read and follow the assembly and adjustment
instructions for your mower. All fasteners are
in the parts bag. Do not discard any parts or
material until the unit is assembled.
WARNING: Before doing any
assembly or maintenance to the
mower, remove the wire from the
spark plug.
NOTE: Torque is measured in foot pounds
(metric N.m). This measurement describes
how tight a nut or bolt must be. The torque
is measured with a torque wrench.
TOOLS REQUIRED
1 Pliers
2 Adjustable open end wrenches
1 Blade type screwdriver
1 Phillips screwdriver
PARTS BAG - CONTENTS
The fasteners and other loose parts are shown below. The fasteners are shown at full size.
NOTE: Your model will not use every fastener shown on this page.
9x10
Bolt
3x136
Screw
1x121
Bolt
15x68
Nut, Flange
Locknut
15x116
43956
Guide, Rope
Top Bottom
17x37
Lockwasher
1x111
Bolt
Flange Nut
15x84
671914
Spacer
ОО
ОО
845
Washer
1101352
Fastener, Cable