MSB Technology DVD Audio Player - Manual (Page 33)

33
Some DVD Video discs feature a Parental Lock level. If your player is set to a lower level than the disc, the disc won’t play. This gives you
some control over what your children watch on your DVD player. Some discs also support the Country Code feature. The player does not
play certain scenes on these discs, depending on the country code you set. Before you can set the Parental Lock level or the Country Code
you must register a password. As the password owner, you can change the Parental Lock level or Country Code whenever you like. You
can also change the password. Not all discs that you may consider inappropriate for your children use the Parental Lock feature. These
discs will always play without requiring the password first. If you forget your password, you’ll need to send the player back to the factory
to be reset, then register a new password.
You must register a password before you can change the Parental Lock level or enter a Country Code.
1 Select ‘Password’.
2 Use the number buttons to enter a 4-digit password.
3 Press ENTER to register the password and return to the Options menu screen.
If you forget your password, you can reset the system, then register a new one. To change your password, confirm your existing password,
then enter a new one.
1 Select ‘Password Change’.
2 Use the number buttons to enter your existing password, then press ENTER. The numbers appear as asterisks as you enter them.
3 Enter a new password.
4 Press ENTER to register the new password and return to the Options menu screen.
Setting/changing the Parental Lock level
1 Select ‘Level Change’.
2 Use number button to enter your password, then press ENTER.
3 Select a new level. Move the joystick left to lock more levels (more discs will require the password); move right to unlock levels.
You can’t lock level 1.
4 Press ENTER to set the new level and return to the Options menu screen.
Setting/changing the Country Code
You may also want to refer to the Country Code list on page #37.
1 Select ‘Country Code’.
2 Use number buttons to enter your password, then press ENTER.
3 Select a country code. There are two ways you can do this. Select by code letter: Use the joystick (up/down) to change the
Country Code. Select by code number: Move the joystick right then use the number buttons to enter the 4-digit Country Code.
4 Press ENTER to set the new Country Code and return to the Options menu screen. Changing the Country Code does not take
effect until the next disc is loaded (or the current disc is reloaded).
Bonus Group
Some DVD-Audio discs have an extra ‘bonus’ group that requires a 4-digit key number to access. See the disc packaging for details and
the key number. When you play a DVD-Audio disc that has a bonus group, the key number input screen appears automatically. You can
also access the same screen here. If you eject the disc, switch the power off, or unplug the player, you will need to re-enter the key number.
Auto Disc Menu (Default setting: On)
This specifies whether the menu (Top menu) is automatically displayed after loading a disc. Set to On if you want the menu displayed
automatically, or Off if you don’t want it displayed. Some DVD discs display a menu automatically regardless of this setting. If you press
(play) while a disc is loading, this setting is ignored.
Group Playback (Default setting: Single)
DVD-Audio discs can have up to 9 groups of tracks. When set to Single, the selected group plays and then the disc stops, or returns to
the menu screen. Use Group Search to select the group to play. (You cannot use the track skip (|<>|) or scan buttons (<>) in this
mode.) Set to All if you want to play all the groups on a disc consecutively. Even if the player is set to All but you select a group to play
from the disc menu, only that group will play. If you stop playback, all groups will play again when you restart playback.
DVD Playback Mode (Default setting: DVD-Audio)
Some DVD-Audio discs contain DVD-Video content in addition to the DVD-Audio. Set to DVD-Audio to play a DVD-Audio disc as if it
were a DVD-Video disc. Note that in this case only the DVD-Video part of the disc will play. This setting reverts to DVD-Audio (Default)
when the disc tray is opened, or the power is switched into standby.