Maxtor 4 CH Digital Multiplex Recorder - Manual (Page 22)

SPECIFICATIONS
21
Video format NTSC/EIA or PAL/CCIR
Hard disk storage IDE type, UDMA 66, supported 200 GB HDD
Record mode Manual / Alarm / Timer / Motion
Camera Input Signal Composite video signal 1 Vp-p 75Ω BNC, 4 channels
Camera Loop Back Composite video signal 1 Vp-p 75Ω BNC, 4 channels
Main Monitor Output Composite video signal 1 Vp-p 75Ω BNC
Call Monitor Output
Composite video signal 1 Vp-p 75Ω BNC
Audio input 4 audio inputs, (RCA) *
Audio output 2 audio outputs, (RCA) **
Motion Detect Area 16 * 12 targets per camera
Motion Detect Sensitivity 99 Levels
Video Loss Detection Yes
Refresh Rate Up to 240 images/sec. for NTSC / 200 images/sec. for PAL
Recording Rate Up to 30 images/sec. for NTSC / 25 images/sec. for PAL
Dwell Time Programmable (1~15 Sec)
Picture in Picture Yes (Movable)
Key Lock
Yes
Picture Zoom 2*2 ~4*4 (Movable)
Camera Title 8 letters
Video Adjustable Hue/ Color/ Contrast/ Brightness Adjustable
Alarm Input TTL input, Hi (5V), Low (GND)
Alarm Output COM./N.O/N.C
Remote Control RS-232 or RS-485
Time Display Format YY/MM/DD, DD/MM/YY, MM/DD/YY, OFF
Power Source AC90~220V, 47Hz~63Hz
Power Consumption <32W
Operation Temperature 10 ~ 40 ℃
RS-232C / RS-485 (bps) 115200 、 57600 、 19200 、 9600 、 4800 、 3600 、 2400 、 1200
Dimension (mm) 343(W) x 223(L) x 59(H)
Net Weight 2.05 k gs
•Specifications are subject to change without notice.
DMR
✻ 4 audio inputs, can select only 1 during operation for recording
✻ ✻ with 2 mono audio outputs from the same source.