Maxtor 4 CH Digital Multiplex Recorder - Manual (Page 12)

MENU OPTIONS
SYSTEM
11
1. AUDIO INPUT
To choose one of 4 channels to record. (
It can only record 1 input
)
2. BUZZER
Set the BUZZER “ON”, it will buzzer by event occurrence when the setting is ON.
6. HDD OVERWRITE
To set the HDD OVERWRITE. When the HDD is full under O/W recording mode, previous recorded files
will be overwritten without further warning notices when the HDD OVERWRITE is ON.
7. MESSAGE LATCH
To select whether the DMR messages will disappear after 10
second or remain on screen. NO is the default setting which the
messages will disappear after 10 sec.
NOTE : Video loss, Alarm and Motion messages will be shown
the same as Alarm Duration time.
8. DATE DISPLAY
To set the date Y/M/D, M/D/Y, D/M/Y and OFF on monitor or not.
9. DATE
To set the date shown on the DMR.
10. TIME
To set the time on the DMR.
11. CLEAR HDD
Delete all the contents of the HDD. When you choose “YES” on this option, press “ENTER” and you
will be prompted with the question shown: Press “→ ” to clear HDD or press ”← ” to cancel.
12. SYSTEM RESET
Reset all system settings back to factory default settings.
DMR
3. EXT ALARM
To set the EXTERNAL AUDIBLE ALARM. It will be trigged by event occurrence
when the setting is ON.
4. VLOSS ALARM
To set the VLOSS ALARM. When the setting is “ON”, the alarm will occurrence by the setting
of Buzzer, EXT alarm or Alarm Duration.
5. MOTION ALARM
To set the MOTION AUDIBLE ALARM. When the setting is “ON”, the alarm will occurrence
by the setting of Buzzer, EXT alarm or Alarm Duration.
(MENU)
TIMER
CAMERA
RECORD
ALARM
DWELL
PIP
MOTION
DISPLAY
REMOTE
USER
SYSTEM
EVENT
(SYSTEM)
AUDIO INPUT 1
BUZZER ON
EXT ALARM ON
VLOSS ALARM ON
MOTION ALARM ON
HDD OVERWRITE YES
MESSAGE LATCH YES
DATE DISPLAY D/M/Y
DATE 26-DEC-2003 [FRI]
TIME 22:55:34
CLEAR HDD YES
SYSTEM RESET YES