Madrigal Imaging N380 User Manual

Page 24

In order to take advantage of this

automatic output level

setting, follow the steps

below:

SELECT THE INPUT WHOSE LEVEL YOU WOULD LIKE TO “AUTOMATE”

ADJUST THE VOLUME TO YOUR PREFERRED LEVEL
This will be the preferred, programmed level.

PRESS AND HOLD THE MODE BUTTON ON THE FRONT PANEL
Hold the mode button until the display reads “

SET DATA

,” as below:

TURN THE VOLUME KNOB COUNTERCLOCKWISE FROM 0.0 UNTIL THE
DISPLAY READS “AUTO”
The display will initially look like the illustration below:

When the volume knob is rotated counterclockwise, the display will change
to resemble the illustration shown below:

In effect, you are setting the

input offset

of this input to remember an abso-

lute volume setting (whatever it was before you held the

mode

button

down) rather than a relative setting (that is, relative to the current playback
volume).