Madrigal Imaging N380 - Manual (Page 11)

11
If you adjust the volume with either the volume knob or the remote control
while
mute is engaged, the preamplifier will adjust its volume from the
muted volume and disengage the mute function. (This to prevent an un-
pleasant surprise when, having increased the volume while muted, some-
one un-mutes the system.)
The factory default setting of the Mute circuit is -20 dB. (See “Setup and
Installation” for information on changing the factory default setting.)
10 STANDBY BUTTON
Toggles the Nº380 between normal operation and
standby , wherein the dis-
play is turned off, the outputs are disconnected, and all controls are inoper-
able. All critical circuitry remains powered-up during
standby to ensure im-
mediate, optimal performance when you are ready to listen to music.
The LED above the standby button will blink slowly when the Nº380 is in
standby , indicating that power is still being provided to the unit. (If the
Nº380 is Linked to other Mark Levinson components which are also in
standby , they will blink in unison.)