MSI MS-6380 - Manual (Page 69)

AWARD ® BIOS Setup
3-25
MODEM Use IRQ
Name the interrupt request (IRQ) line assigned to the modem (if any) on your
system. Activity of the selected IRQ always awakens the system. Settings:
3, 4, 5, 7, 9, 10, 11 and NA.
Soft-Off by PWRBTN
This feature allows users to configure the power button function. Settings
are:
Instant-Off The power button functions as a normal power-on/-
off button.
Delay 4 Sec When you press the power button, the computer
enters the suspend/sleep mode, but if the button is
pressed for more than four seconds, the computer
is turned off.
IRQ/Event Activity Detect
Press to enter the sub-menu and the following screen appears:
USB Resume from S3, VGA, LPT & COM, HDD & FDD, PCI Master,
PowerOn by PCI Card, Wake Up On LAN/Ring
These items specify whether the system will be awakened from power
saving modes when activity or input signal of the specified hardware
peripheral or component is detected.
IRQ/Event Activity Detect
88
8